Redsn0w 0.9.6rc14: Untethered iOS 4.3.2 Jailbreak For iPhone, iPad & iPod Touch Released


Redsn0w

iPhone Dev Team has released Redsn0w 0.9.6r14 to jailbreak iOS 4.3.2 that was released last week for GSM iPhone 4 iPhone 3GS, iPod Touch 4G, iPod Touch 3G and iPad 1 users.

iPhone Dev team has used the untethered iOS 4.3.2 jailbreak developed by iPhone hacking expert Stefan Esser.

Dev Team has provided the following information on their blog:

Only a few weeks after the 4.3.1 untether created by @i0n1c was released, Apple pushed out firmware 4.3.2. Thankfully, it appears Apple didn’t have a chance to fix the hole used by @i0n1c’s untether, so he ported his code over to 4.3.2’s kernel.  Today’s redsn0w has been updated to include it.

Redsn0w 0.9.6rc14 supports the following iOS devices for iOS 4.3.2:

It doesn’t support iPad 2 or Verizon iPhone 4 on iOS 4.2.7.

Dev team has also warned iPhone users who care about unlocking to wait for them to release PwnageTool for Mac to preserve their iPhone’s baseband:

As always, ultrasn0w unlockers should stay away from redsn0w and only update their firmware through a custom IPSW. We’ll release a new version of PwnageTool sometime this week.

Please note that jailbreaking your iDevice may void its warranty so proceed at your own risk. Please don’t forget to backup your iPhone before you proceed. You can refer to this post for instructions on how to backup your iPhone.

Redsn0w 0.9.6rc14 is available for Windows and Mac users and you can download it from one of the mirror sites:

Dev team has provided the following troubleshooting tip for users facing an issue updating to iOS 4.3.2:

Note that many people are currently having problems updating to 4.3.2 through saurik’s server. You’ll need to remove the gs.apple.com entry in your hosts file in order to restore directly to Apple’s servers.

If you’re new to the jailbreaking world and wondering what to do after jailbreaking your iPhone, checkout our jailbreak apps category page to find out the apps you can install on your iPhone using the Cydia app (which is also installed after successfully jailbreaking your iOS device).

As always, please let us know how it goes in the comments.

Thanks everyone for the tip!

[via Dev Team’s blog]

Like this post? Share it!

  • Mackie

    try it later today

  • Dantheman

    My iPad 2 is feeling lonely…

    • Bravo_007

      I second that 🙁 is it worth waiting on fw 4.3 or just update it to 4.3.2??? Im starting to lose hope in ipad 2 Jailbreak!!!

    • Mac Daddy

      No doubt!! What’s up with that ish??

  • Dantheman

    I’m still on 4.2 on my iPhone 4, do I need to update to 4.3.1 before I can do this jailbreak?

    • RiffRath

      Yes you can just JB without update but use older redsnow ending in rc11

  • RBSHoo

    Will you be posting instructions?

  • Kieran

    Any chance of a step by step?

  • Michael

    Still no unlock for yet an painfully awaiting solution for unlocking Iphone 4 baseband 2.xx and above it’s worrying!!

  • Tweet from chpwn:

    “Apple has blocked all of Amazon (where @saurik’s SHSH servers are hosted) from accessing gs.apple.com (Apple’s SHSH server). /cc @notcom”

  • Kieran

    Which IPSW do I need 4.3.2 OR 4.3.1? And where can i download it from?

  • sam

    ih8sn0w just said on twitter that apple blocked cydia servers from accesing gs.apple.com servers that mean we will not be able to restore to previes ios firemware and thats why people are having problems restoring

    we are screwed!!!!!!

    • Paradox

      I’m surprised Apple didn’t do this sooner. Pretty damn smart, pretty damn simple.

      Hate to say it but Kudos to Apple. I love my jailbreak as much as anyone else. But, I have no complaints about what I have factory fresh either. Back in the day, jailbreaking was a necessity for functionality. Now its more of a luxury.

      • IdiotHunter

        Agreed.

  • sam

    i think this is happening due to the recent apple database breach to unlock the iphone!!!!

  • bruno

    Just updated my 3gs on 06.15.00 to 4.3.2 untethered. But its not unlocked, just says “searching..” What do I have to do? Thought Ultrasn0w 1.2.1 is fixed?

  • Lg1

    Please iPhone hacks!!! Can u put on here step by step!!! Please thank you

    • r77w8c39

      It’s the same as the last few jailbreak. Should not be a issue in terms of jailbreaking

  • tinyumbrella fan

    If you saved your shsh blobs using tinyUmbrella the jailbreak works fine because they’re saved locally. You can still use ultrasn0w if you stayed with the first BB because it doesn’t update when tinyumbrella is running. I jailbroke mine, kept original BB and am up and running. I only upgraded because I was hoping it would fix the single bar reception issue (which it didn’t). Ultrasn0w doesn’t fix it now either which is fine because on 4.3.1 ultrasn0w broke visual voicemail.

    • tinyumbrella fan

      Downgraded to 4.3.1… Would rather be able to toggle ultrasn0w and have my reception indicator work. When they update ultrasn0w, i’ll try again.

  • r77w8c39

    Jailbreak successfully. No issue so far. Update to 4.3.2 then jailbreak using it.

  • Tremayne

    Will This Work For 03.10.01 ??????

    • Bill

      Will it work with 03.10.01 please???? Anyone?

  • Andy-RO

    I have not completed the jailbreak in quite some time. I just updated to the new 4.3.2 software and downloaded Redsn0w 0.9.6rc14. Upon opening the file, it asks for the corresponding IPSW. What do I select at this point? My latest iPhone restore that is in the window? Please advise.

    • r77w8c39

      C:\Users\User\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates

  • KC

    Hello everyone.. wondering if anyone knows if baseband 04.10.01 is unlockable yet? Thanks for the help! ^^

    • fas

      Dont even wait for Dev team, they are useless..

  • Petter Poppet

    No unlock for Baseband 04.10.01 yet.

    Sorry

  • derek

    Yeah what is the IPSW to be installed?
    once i running the Redsn0w 0.9.6rc14
    Pls advise

  • Nebie

    New to this jailbreaking thing can anyone tell me if I can jailbreak 3GS on 4.3.1? Don’t understand this baseband thing? Have uploaded direct from iTunes each update.

  • Yoda

    This iOS 4.3.2 JB is not working.
    I was left with a white blank Cydia icon which shuts down as soon as I open it.

  • iPhone Guy

    I updated with original iOS 4.3.2 and then used this rc14 JB from redsn0w and it works perfectly!!! Thank you!

  • Hussain

    Hi,
    I updated my 3GS to 4.3.2 and I used Redsnow to jailbreak it, and everything goes well and I see Redsnow logo saying installing bundles but when the iphone restarts, I do not see cydia!

    Also I noticed during the jailbroken process, it says not successful firmware download, giving up although I am sure I downloaded the proper firmware. Any suggestion?!

  • IdiotHunter

    Clearly fake. Modded. Black in port instead of white. Capacity written on the back. Random, non-consumer apps on the springboard. If anything he’s probably a programmer who wanted his phone to be unique. Would be nice to see this redesigned multitasking board in the future though.

    • IdiotHunter

      Strange.. I posted this to a different post and it ended up here.. Go figure.

  • Justin

    gosh 4.3.1 is soooooooo slow big time on my iphone 3gs 16gb…I dunno if it’s me but I think my iphone has become extremely slow prior to the upgrade. I seriously can’t wait to upgrade to this latest version in hopes that it fixes this lousy issue!

    • Apou

      Same here!! Sooooo slow. iPhone 3GS 8gb.

    • Luke

      Same on 3GS 32gb – soo slow I am considdering restoring to non-jailbroken.

  • can i unlock iphone4 4.2.1 with firmware 3.10.01

  • lee

    currently is using 4.3.1 JB using rc 12
    if i update to 4.3.2 JB, will the data gone?
    any where to refer for update the JB version ios?

  • Fry

    wtf, it keeps saying the site isn’t found. This happens to every redsn0w file download I try to click on. I’m getting pissed.