How to install Cydia on iOS 8 – iOS 8.1 after using Pangu Jailbreak (Video Tutorial)


Cydia Package

The Pangu team today released a jailbreak for all devices running iOS 8 and iOS 8.1 devices. There was just one thing missing in the jailbreak — Cydia.

The good news is that saurik has quickly updated Cydia for iOS 8 and iOS 8.1, and made it available for manual download through his website. The Pangu team is expected to release an updated version of Pangu8, but if you can’t wait until then, here’s how to install Cydia the manual way.

Warning: We understand that the process below is quite complex, unless you’re familiar with SFTP and SSH. It also involves running commands as root, which can be risky. So we ask you to proceed with caution, and discourage you from installing Cydia the manual way unless absolutely necessary. You should also backup your device, if you haven’t already, should anything go wrong.

  • Ensure that your iOS 8 – iOS 8.1 device is jailbroken. You can follow our guide if you need help:

➤ How to Jailbreak iOS 8.1 – iOS 8 using Pangu

  • Download the Cydia deb file from this link, and cydia-lproj file from this link on your PC/Mac.
  • You’ll need to to send the file to your iOS device via SFTP. If you’re on Mac, download and install Cyberduck, and if you’re on Windows, download and install WinSCP.
  • Ensure that your PC/Mac and iOS device are on the same Wi-Fi network. Get the IP address of your device from Settings > Wi-Fi  and tap the “i” button against the network you’re connected to. Note down the series of numbers labelled IP Address.
  • Now open Cyberduck or WinSCP and SSH into your device, with the address as the IP address you got from the earlier step, and the username as ‘root’ and password as ‘alpine’ (both without quotes).
  • Now you should see a file browser, and you can drag and drop the two deb files in a location you can remember.
  • Next press Ctrl + T or ⌘ + T to start an SSH command line session. Navigate to the same folder (using the cd command) where you had copied the deb file.
  • Now, run these commands in order:’dpkg -i cydia-lproj_1.1.12_iphoneos-arm.deb’  ‘dpkg -i cydia_1.1.13_iphoneos-arm.deb’ (without quotes)
  • If you get warnings of any dependency missing, download the dependency manually from this link and repeat the process, and try to install Cydia again with the same command as above.
  • Reboot your device, and if all goes well, you should see a Cydia icon on your home screen.

Update:

If you’re having trouble with the above method try this one:

  • First you will need to be jailbroken. Learn how to jailbreak here: How to Jailbreak iOS 8 – 8.1 using Pangu
  • Once you’re jailbroken, go into the Pangu App and download and install OpenSSH.
  • Now, download the 2 deb files here and here and save them to your desktop.
  • Once your deb files are saved, you’ll need to download an SSH client like Cyberduck 2 (Mac), WinSCP (Windows). For this tutorial, I’ll be using FileZilla and Terminal on the Mac so I will tell you explicitly how to use them both. If you use other software, the steps will be similar.
  • First open up Settings on your iPhone and tap on “WiFi”. Then tap on the “i” in order to find out what your IP address is. You’ll need to keep this screen up to revert back to.
  • Now, open up FileZilla. At the top you will need to fill in this information:
  •      Host: The IP address from your iPhone
  •      Username: root
  •      Password: alpine
  •      Port: 21 or 22, use whichever one works.
  • Now once you’re connected, click on the folder named “var” to expand it. Scroll down to “root” and expand it. There you will find a folder called “Media”. Open it up and create a new folder called “Cydia”. Open up Cydia and create another folder called “AutoInstall” and open it up. Here is where you’ll drag and drop your deb files. Drag them both over and drop them in and wait for them to transfer. Once they’re transferred over, we’re done with FileZilla.
  • Now, open Terminal. Just search for it in Spotlight, if you’re not familiar with the program.
  • Here is where we will SSH into your iPhone, so you’ll need your IP address again. So type this, but of course with out quotes:
  •      “ssh root@YourIPAddressHere” and hit enter.
  •      Password: “alpine”
  • Once you’re logged in, we need to go to the folder where we put the deb files. So type this:
  • “cd /var/root/Media/Cydia/AutoInstall/” and hit enter. Now we’re in the folder so we can install the deb files. Now type this:
  • “dpkg –install cydia-lproj_1.1.12_iphoneos-arm.deb cydia_1.1.13_iphoneos-arm.deb” and hit enter.  This should install the debs. Now, once it’s completed, reboot your phone and Cydia should be on your phone.

You can also check out our video tutorial on how to install Cydia on iOS 8.1 – iOS 8.0 for Mac users:

You can also check out our video tutorial on how to install Cydia on iOS 8.1 – iOS 8.0 for Windows users:

Let us know if you managed to install Cydia using this process.

Like this post? Share it!

  • karl

    how do we install the dependencies? just copy onto the root or do we need to terminal install them?

    • you need to run the dpkg command for each dependency via terminal

      • karl

        when i tried to run the command to install the dependency I was missing I got ‘dpkg: dependency problems prevent configuration of cydia-lproj:

        cydia-lproj depends on cydia; however:

        Package cydia is not configured yet.’

        • karl

          can anyone help

          • Richard Mongler

            http://apt.saurik.com/cydia/debs/cydia-lproj_1.1.12_iphoneos-arm.deb

            install that along with cydia in the same command line.

          • Karl

            Got cydia working. Does cctoggles work? Thanks

          • Twan

            How did you get it to work…?

          • Deep

            See my answer above

          • Twan

            i dont understand, so in 1 command line i have to put them both?

            I have put them both in /private/var/root with the names:
            cydia.deb and proj.deb

            It stays on “Setting up cydia (1.1.13) …”

          • Lalas

            dpkg -i cydia-lproj_1.1.12_iphoneos-arm.deb cydia_1.1.13_iphoneos-arm.deb
            Both deb packages on the same command line! separated by a empty space. That Works, but i have “setting up cydia 1.1.13” for a long time and doesn´t continues 🙁

          • Twan

            Thats the problem what i also have here.

          • Eulalio Aguilera Perusquia

            Needs too much time or what? I dont think so…

          • Greg1980

            any progress? I have the same…

          • Eulalio Aguilera Perusquia

            trying with autoinstall on cydia folder as NJ said, stay…

          • Eulalio Aguilera Perusquia

            Yes as NJ said after the 3rd reboot i have cydia icon installed
            Now running cydia and will see…

          • MaxdMerc

            3rd Reboot (switch off and on) or 3rd Respring (home and lock button) ??

          • Eulalio Aguilera Perusquia

            reboot! respring should be donde by terminal I think
            After rebooting I saw cydia icon but just after 3rth

          • Mike

            How did u do u do it

          • D Mongler

            Also, reboot. It’s probably already there.

        • Michel Steinbusch

          dpkg -i cydia*

          Both files in the same directory you won’t get to much output after you are seeing configuring cydia, wait a few minuts and then reboot. Enjoy

      • karl

        i get this dpkg: dependency problems prevent configuration of cydia-lproj:

        cydia-lproj depends on cydia; however:

        Package cydia is not configured yet.

    • Deep

      Hi you need to install both dependcies (deb files) on the same time like: dpkg -i cydia-lproj ..deb cydia_1.1.13_iphoneos-arm.deb on the same time. I got it working. There is a space between the deb file names.

  • Imad tad

    Started .

  • JD

    I just the password “alpine” but it didn’t work

    • Xvolks

      Did you install SSH on a previous version of IOS ?
      Maybe the old password has been saved and restored on this device…

      • Karthik Pasupathy

        i forgot my password..please help me to recover it sir…please

  • is there any video for tito ?

  • Twan

    I get this:

    /private/var/root$ dpkg -i cydia.deb

    dpkg: serious warning: files list file for package `io.pangu.loader’ missing, assuming package has no files currently installed.

    (Reading database … 2628 files and directories currently installed.)

    Preparing to replace cydia 1.1.13 (using cydia.deb) …

    Unpacking replacement cydia …

    dpkg: dependency problems prevent configuration of cydia:

    cydia depends on cydia-lproj (>= 1.1.10); however:

    Package cydia-lproj is not installed.

    dpkg: error processing cydia (–install):

    dependency problems – leaving unconfigured

    Errors were encountered while processing:

    cydia

    • Download cydia-lproj from here, copy it to device, and run the dpkg command for that package, and then retry http://apt.saurik.com/debs/

      • Twan

        which file do i need? i tried cydia_1.1.13_iphoneos-arm.deb but that wont work.

        Theres no download for version 1.1.13…

      • karl

        when trying to install the missing dependancy i get:

        dpkg: serious warning: files list file for package `io.pangu.loader’ missing, assuming package has no files currently installed.

        (Reading database … 4022 files and directories currently installed.)

        Preparing to replace cydia-lproj 1.1.10 (using …/cydia-lproj_1.1.10_iphoneos-arm.deb) …

        Unpacking replacement cydia-lproj …

        dpkg: dependency problems prevent configuration of cydia-lproj:

        cydia-lproj depends on cydia; however:

        Package cydia is not configured yet.

        dpkg: error processing cydia-lproj (–install):

        dependency problems – leaving unconfigured

        Errors were encountered while processing:

        cydia-lproj

  • darrel1986

    I got the same tried to install Cydia it ses Cydia is dependant on cydia-proj so try to install cydia-lproj and it ses it’s dependant on cydia

  • karl

    dont think anyone has a fix for:

    dpkg: serious warning: files list file for package `io.pangu.loader’ missing, assuming package has no files currently installed.

    (Reading database … 4022 files and directories currently installed.)

    Preparing to replace cydia-lproj 1.1.10 (using …/cydia-lproj_1.1.10_iphoneos-arm.deb) …

    Unpacking replacement cydia-lproj …

    dpkg: dependency problems prevent configuration of cydia-lproj:

    cydia-lproj depends on cydia; however:

    Package cydia is not configured yet.

    dpkg: error processing cydia-lproj (–install):

    dependency problems – leaving unconfigured

    Errors were encountered while processing:

    cydia-lproj

    • Renf

      Try ‘dpkg -i –ignore-depends=cydia cydia-lproj_1.1.12_iphoneos-arm.deb’ instead.. no quotes.
      Good luck xP

      • Michel Steinbusch

        use dpkg -i cydia*

        • Renf

          …Or that. That works too.

      • Gonçalo

        thaks a lot, it worked for me!

  • Tim

    Worked, thanks! Now have to wait for mobile substrate to be updated for iOS 8.

  • NJ

    Navigate to /var/root/Media

    Make a folder called Cydia, in that make a folder called AutoInstall, drop the deb into there, reboot device

    • glenn

      and then?

      • YungCinnabunDatNigga

        it should install but its not working for me either

        • Imad tad

          just set the permission of the files to 7777 , which means check all the empty places on the folder permission you have created

          • glenn

            how to do you do that?

          • YungCinnabunDatNigga

            right click the deb in winscp and go to properties and type in “7777” without quotes in there

          • Guest

            i’m on mac ;s

          • YungCinnabunDatNigga

            did you get cydia on it or no?

          • baitbus

            this method worked for me. thanks bro

          • YungCinnabunDatNigga

            no problem and for anyone else that needs the deb files here are both (you need to put both in the auto install folder i did 1.1.3 first then restarted my phone and put in 1.1.2 then restarted twice and it worked)

            http://www.filedropper.com/cydia1113iphoneos-arm
            http://www.filedropper.com/cydia-lproj1112iphoneos-arm

          • matt

            it hasnt worked for me and i rebooted it multiple times

          • baitbus

            maybe you are not doing it right

          • Spiros Fotis

            i finished the first part jailbreaking (How to Jailbreak iOS 8.1 – iOS 8 using Pangu), and i have already cyndia icon!! should i move to this part here?

          • Genaro D

            Thanks for the info! After 3 hours of not knowing why it wouldn’t install, your tips solved my problem.

          • Xvolks

            something like : chmod -R 777 *

          • YungCinnabunDatNigga

            and also you need to install both files in var/root/Media/Cydia/AutoInstall and if you dont have those last 2 folders make them exactly how theyre spelled

          • glenn

            did it! thank you!! and greets from Belgium!

          • Neo

            me 2 🙂 many thanks from Romania !

          • Guest

            and set 7777 permissions to both deb files in Properties

          • Tgod1991

            Why is it not working for me? I drop both deb files in there and reboot? or just 1 of the 2?

          • yungcinnabun

            i did one at a time i did 1.1.3 first then reboot twice then did 1.1.2 and rebooted twice and it was there try setting the file permissions on both files to 7777 by right clicking and go to properties

          • Tgod1991

            I got it working and CYDIA installed but now my iMessage and text messaging for pictures do not work

          • Nick Bro

            mine too even before installing cydia..

          • Tgod1991

            Well wtf is going on its very annoying if you find a solution let me know. I’ll do the same

          • laurnzo

            My txt and mms works fine

          • Tgod1991

            Picture messaging. You just can’t select from recents have to go to photo album

          • Tgod1991

            All i did was restore phone and rejailbreak everything works flawless

          • Tgod1991

            Thank you it worked!

          • Liem

            Absolutely working. Remember, to reboot twice after you drag two deb files to var/root/Media/Cydia/AutoInstall . The reason is, the first reboot, the phone will install the two files. The second reboot you will see Cydia. MAKE SURE YOU SET BOTH FILES PERMISSION TO 7777, as few people has already mentioned.

          • Eric Gaviria Lds

            i dont know how to set both files to permission 7777? where i go properties and what else i do am so lost man

        • Adhama Essam

          works like magic … 🙂

    • Twan

      THANKS! It now showing ”Preparing Filesystem (Cydia will exit when complete.)”

    • iilliya

      thanks

      • Todd

        Works for me too!
        thanks a ton!

      • Tmel4198

        Both debs? or just the 1.1.13 iphone deb

        • Vipul Bengt Beniwal

          both

          • Luis Goncalves

            Sorry guys but I tried every step on my windows computer using WinSCP and I got an error on install the .deb nothing worked for me 🙁 🙁 any one know why I’m getting an error

          • Jake

            I was having issues with it and was getting pretty frustrated (1:38 in the morning) and then I went in to pangu and realized I hadn’t applied the new update for it. Did that and then cydia popped up! Try and see if that works.

    • mlee19841

      thanks. took a couple reboots. is their a way to remove that pangu app that came with the jailbreak install its a blue icon and says pangu under it.

    • TheWhiteHammer22

      This method works and is (in my opinion) easier than method in the article

      • asad

        what can i do ??
        i dont understand this step ??

        Now, open Terminal. Just search for it in Spotlight, if you’re not familiar with the program.

    • Steve

      do I have to change the folder and file permisions?

    • romeo

      can u make a link to those files please mine wont show up

    • retribution

      You don’t need to do that a lot of people are having problems with the cydia installing (check pangu app /manager/remove and search both cydia translations and cydia installer) it seems to install ok but loads of problems with the icon showing,

      the way i did it was /private/var/root and copy and pasted both debs over then used winSCP Terminal/Console and typed in: dpkg -i *.deb and hit the Execute button,
      waited 30 seconds then typed reboot and clicking execute and it worked, i tried with manually
      rebooting the phone previously about 5 times and no cydia icon but it
      seems typing the command “reboot” and clicking execute on the winSCP Terminal/Console worked basically saving the work completed rather than disconnecting manually

      • retribution

        i just got the cydia app on my ipad 4, but this time it was a bit different

        I installed the Pangu app then checked the Pangu manager file and
        this time there wasn’t a cydia installer and cydia translations files
        there which was strange as the iphone 4s there was from the get go, so i
        got the winSCP up and running and i got the 2 deb files (and i forgot
        to mention this last time) i clicked on the properties of each on my
        laptop (windows 7) and both files were blocked as they came from another
        computer, i unlocked these and then transfered both files over to the
        /var/root folder, i then checked and found that this time in the media
        folder on the ipad i had the /var/root/Media/AutoInstall/ so i put these in the folder and got the winSCP Terminal/Console up and typed “reboot” and cydia didn’t show up.

        So then i decided to put them back in var/root and typed in: dpkg -i *.deb and hit the Execute button, waited 30 seconds then typed reboot and it worked cydia folder showed up

        All i can think of is as apple software grows and things change this is the reason the /var/root/Media/AutoInstall/ folders were on the ipad but not the iphone 4s

        Now i am going to fiddle and see what apps work with ios 8

        • Marji G Meri

          I don’t know why AutoInstall trick/way didn’t work for you! But, in my case I rebooted for 3-4 times and it was not working. With me, I believe the problem was that shitty PP app. I forgot to uncheck that box while jailbreaking after a clean install of iOS thru iTunes. Even though I managed to uncheck it while jailbreaking was half way through, that PP app appeared after jailbreak. I tried to do clean restores for 2 more times after that but, every jailbreak after the first one installed PP app despite of unchecking that box. I also checked remove section in the Pangu app, but, PP app was not listed there. Only one solution to remove that PP app was to do it through Cydia and I didn’t have Cydia in the first place. So, I said f*** it. I went ahead and tried to install Cydia through Autoinstall way. I did not see Cydia after the first reboot so I rebooted my iPhone 5 for 3-4 times through terminal and I was giving up and going to try the -i way. But, before doing it, I checked the remove section of Pangu app and surprisingly the PP20 app showed up. Without a blink I removed it and the message on after the removal was not “reboot” or “press OK” but was “iPhone is going to respring” (or something like that, but, respring is the key). And to my surprise the f***ing PP app was replace by Cydia. I was like WTF??

          • Marvfali

            Damn… Dude… WTF…? When I saw your reply and I did it, my face was like, Damn…. WTF aren’t you a better hacker than iPhoneHacks guys….

            Thanks a lot dude…

          • blade1abe

            WTF! did exactly as u did, it WORKED!!! HAHA THANKS DUDE!

          • Halth

            This shit worked if your having problems where the command prompt hangs and doesn’t install cydia after waiting 30 seconds do what this guy said, remove the PP app on the pangu app on your jailbroken phone. click manage then go to the remove tab, find the PP app and click the trash can. After you respring Cydia will magically appear!

            Thanks man! 😀

        • Nick666

          Cydia icon wasn’t showing, but I could see it was installed in the list of pangu apps. I followed exactly these instructions and my cydia icon showed on the next reboot! I think waiting 30 seconds before rebooting is the key.

        • jnasty

          YOU ARE THE MAN! only method that worked for me

        • jsmith

          you are really the man copying the files to root folder solved all my problems

      • Yassine

        Thank you, it worked after i dropped the 2 files in WinSCP
        iPhone 5s iOS 8.1

        • jorge

          how much time did u wait? i keep seeing the setting up…..

          • Johnny

            me too

      • Gary Liew

        Thanks a lot. Got it working on my iPad 2 iOS 8.1

      • Anton

        thx! this solved my problems!

      • Partha-Hosur

        Thanks..it worked for me..ipad 3 ios 8.1

      • John

        Hey whats up bud. I tried your method but i get this as a error. Got any ideas?

        /private/var/root$ dpkg -i *.deb

        dpkg: serious warning: files list file for package `io.pangu.loader’ missing, assuming package has no files currently installed.

        (Reading database … 1062 files and directories currently installed.)

        Preparing to replace cydia-lproj 1.1.12 (using cydia-lproj_1.1.12_iphoneos-arm.deb) …

        Unpacking replacement cydia-lproj …

        Preparing to replace cydia 1.1.13 (using cydia_1.1.13_iphoneos-arm.deb) …

        Unpacking replacement cydia …

        Setting up cydia-lproj (1.1.12) …

        Setting up cydia (1.1.13) …

      • Jonathan Walther

        Worked fine for me! Thx alot mate!

      • Foleyfactor

        @retribution, your a star!! couldnt figure out why it wasnt showing even though I knew it installed. typing “reboot” is definitely the trick.

    • Fred

      so i dont need to find the dependencies this way? im a bit impatient when it doesnt have a 1-click-done sorta thing

    • matt

      on winspc or cyberduck?

    • itguy78

      Worked for me too, thanks!

    • johnny

      i cant find this folder

    • designed

      Little problems, but worked like a charm 🙂

    • Mirza Mudassir

      how i cant understand

    • MegaAce042

      Options marked [*] produce a lot of output – pipe it through `less’ or `more’ !

  • novajimster

    help, it says acess denied. what do i do

  • Xvolks

    On Pangu OpenSSL cannot be installed : dpkg failed to open package info file /var/lib/dpkg/status for reading: No such file or directory

    • Xvolks

      More infos : iOS 8.1 on iPhone 6 installed via OTA.
      I’m downloading iOS8.1 to restore from DFU mode, but it’ll take ages with my poor internet connection…

  • Trey Driver

    Looks like sending pictures through iMessage doesn’t work for me now

  • Twan

    I install it on the same command line now, but it stays on “Setting up cydia (1.1.13) …” for a while now. What to do?

    • kings121

      Same here

  • Trey Driver

    be careful guys phone is bricked now

    • Apparently there is a restore feature inside pangu if something like this happens. Since I don’t know chinese, i cant tell you what to do. sorry friend, try asking about it on /r/jailbreak.

      • Drew Reed

        this wont brick your phone. as previous poster said, you can still restore.

        • clay

          i need help i followed all steps and it says setting up cydia in command prompt how long should it sit there should I hard reboot?

    • Brett Rigby

      Bricked lol shut up you idiot, Being able to put your phone in DFU mode and restore it means its not bricked. stop spreading misinformation based on your lack of technical knowledge

  • miki

    please help

    • Xvolks

      You should consider to elaborate your problem if you really want to get some help…

    • cerpow

      install latest itunes

    • Gaurav Girdhar

      sign out from your icloud account

    • Brett Rigby

      turn off find my iphone in icloud

  • Guest

    help

  • IPeris Pc

    use iSpirit to install cydia no error %100

    • Mark

      No it doesn’t. Tried and says acf2 service is not installed

  • babyjohnny

    So i made the folders and changed the properties on the debs, then ran both of the debs in one command line, and now it just says “installing cydia” but its taking forever! did i do something wrong?

  • iHacks App iOS 7

    I have jailbroken my 4s on 8.1 and on ifunbox i can’t access the raw filesystem such as /Library/. it puts me with media and some other stuff. please help

  • iHacks App iOS 7

    and also i tried setting up a connection with cyberduck but it keeps failing!!!!

  • CBCIVICATX

    Somebody already tried on 6/6+ with Cydia installed?

    • Macgyuver

      Installed on 6+ here and working although almost 99% of all packages do not work on iOS 8

    • Xvolks

      Pangu app is unable to install OpenSSL (dependency of OpenSSH) with error message file not found /var/lib/dpkg/status.
      Am I the only one to have this behaviour ?

  • Osiala

    THANKS! Works perfectly!

    • Karl Smith

      anybdy know whats actually compatible so far?

  • melka_ashur

    Having a problem connecting to SSH despite having installed it through Pangu and Rebooted. This is confirmed by inability to connect to WINSCP as well as using the SSH Terminal in iFunBox. HELPPPP

    • iHacks App iOS 7

      same

  • iHacks App iOS 7

    connection fails overtime in winscp or cyberduck

    • Michel Steinbusch

      Install SSH trough pangu app

  • declanland

    Anyone having problems with Cydia not showing up after dpkg install:

    1: Open an SSH Session
    2: Type these commands followed by the return key after each other:

    cd /Applications
    chmod -R 0755 Cydia.app
    chown -R root:wheel Cydia.app
    reboot

    • iHacks App iOS 7

      i can’t connect to my device on cyberduck or winscp HELP!!!!

    • iHacks App iOS 7

      it just gives me an error each time

    • iHacks App iOS 7

      and i DID install OpenSSH through the pangu app

  • mike

    how do i run ssh on my ipod once i downloaded

  • iHacks App iOS 7

    i installed openssh. Do i need to do anything else before going onto cyberduck??

  • Daniel

    Followed all the steps and I now have Cydia. Opened it, said installing filesystem. Phone rebooted, and now Cydia is working perfectly. Thank you very much.

    • Aaron

      where is that ssh stuff and how do i get there

  • kings121

    Run those in the same sequence when finish restart the iDevice you should see cydia

    dpkg -i cydia-lproj_1.1.12_iphoneos-arm.deb dpkg -i cydia_1.1.13_iphoneos-arm.deb

  • [ Electroshock11 ]

    how do i navigate to the folder i put the 2 files in with the cd command

  • CBCIVICATX

    I have an iPad mini. I’m updating it to iOS 8.1 and I’m gonna give a shot before to experiment on my 6+. I’ll give my feedback and try to do a video tutorial of it.

  • babyjohnny

    took a couple of tries but i’m now on the “preparing filesystem” screen on my iphone 6 running ios 8.1

    • CBCIVICATX

      Awesome one good news! Congrats

  • Remy Maas

    Aight works like a charm. Remember to make those file’s (var/root/Media/Cydia/AutoInstalland) set them to permission 7777 (check all boxes) 2 commands and now works like a charm.

    Warning: Almost nothing works on ios 8 so it might be a good idea to wait some time when evad3rs make their jailbreak with cydia on it.

    Greetings from Belgium

  • mike

    when i type the commands i have errors please hlp

  • bert

    can someone post a video step by step on installing cydia im a little confused with the instructions i would really appreciate it very much

  • [ Electroshock11 ]

    HELP i keep getting a dependency error and i dont have a clue how to fix it, can someone make a youtube video on how to do it all. thanks

  • Gaurav Girdhar

    dpkg: serious warning: files list file for package `io.pangu.loader’ missing, assuming package has no files currently installed.
    (Reading database … 4022 files and directories currently installed.)
    Preparing to replace cydia-lproj 1.1.12 (using cydia-lproj_1.1.12_iphoneos-arm.deb) …
    Unpacking replacement cydia-lproj …
    Setting up cydia-lproj (1.1.12) …
    plz help it stuck over here tried a lot of time

    • mike

      do it one by one
      excute 1 type in the next

      • Gaurav Girdhar

        m doing it one by one first cydia iproj

        • mike

          do you have both deb files in the folder 1.1.13 and 1.1.12

          • Gaurav Girdhar

            yes i have both file in same folder

  • Tgod1991

    I have cydia now working, but now my picture messaging does not work

  • mike

    help what do i do next

    • [ Electroshock11 ]

      whatcha need

      • mike

        i put both cmds and it said setting up cydia for both hat do i do next

        • [ Electroshock11 ]

          just reboot you device an if all goes well you should see cydia in you seccond home screen

          • mike

            so just turn off then back on with the power button?

          • [ Electroshock11 ]

            yes

          • [ Electroshock11 ]

            Good Luck 🙂

          • mike

            cydia didnt show up

          • [ Electroshock11 ]

            hmm did you make the folders and stuff

          • mike

            no what do you mean i just took the deb files and put them in like that

          • [ Electroshock11 ]

            ok well you need to take the files and make 2 folders one inside the other like this in the media folder- Cydia> AutoInstall and spell them exactly like that and do the commands in order again

          • mike

            can you show me with pictures

          • mike

            so i goto my desk top, click new folder called cydia, open that make one inside that called autoinstall and place both debs in there?

          • mike

            help please

          • mike

            DUDE

      • mit

        im stuck at the same point.does it mean the installation is complete and i should reboot??

  • [ Electroshock11 ]

    rebooted and clicked on cydia and currently prepairing filesystem

    • mike

      can you help me im stuck

    • mike

      what do i do next

    • mike

      im at the part where it says setting up cydia after entering both commands what do i do next

  • kd

    Please help ! idk how to ssh

    • [ Electroshock11 ]

      WHAT???

      • kd

        Im stuck on this part

        “Now open Cyberduck or WinSCP and SSH into your device, with the address as the IP address you got from the earlier step, and the username as ‘root’ and password as ‘alpine’ (both without quotes).”

        i opened WinSCP but i dont know what to do next

        • [ Electroshock11 ]

          you need to go into settings> WiFi, and get your IP address from there and then go to your computer and type the ip in as the host name, the username should be root, and the password should be alpine, then after all of that you should be connecting, if not you need to have you I device jailbroken and SSH installed

        • kings121

          are you connected with WinSCP??

  • RNG

    Wait aren’t the instructions like straight forward enough or is it just me?

    • kd

      No 🙁 im stuck on the ssh part

  • mike

    some one please help, i entered both commands it it said setting up cyia for both of them what next?

    • Michel Steinbusch

      Reboot 🙂

  • Michal Blahuta

    where do I download SSH , when I have no installed cydia ?

  • Gaurav Girdhar

    dpkg: serious warning: files list file for package `io.pangu.loader’ missing, assuming package has no files currently installed.
    (Reading database … 4022 files and directories currently installed.)
    what does dis line means

  • Kalllal

    Here’s the result 😛

  • JSM

    copy the files to the /tmp directory and use this command
    dpkg -i /tmp/cydia_1.1.13_iphoneos-arm.deb cydia-lproj_1.1.12_iphoneos-arm.deb and cydia icon will show up just click on the icon Hope this helps!!!

  • Ed Carney

    This Jailbreak is too much work.

    • David Smith

      Yeah I’m in no hurry sticking to 7 for awhile

  • damian

    i got it to work using the guide, however, i encountered errors that apparently didnt matter in shell

  • Najim Uddin

    Owo Its work for me.. 🙂 Thanks..

    • mike

      how do i make the folders

  • Guest

    Where is the problem?

    • SpecialOpZ

      Do a hard reboot, power + home buttons at the same time. Run the same commands again when your phone reboots. I also had to hard reboot my phone 2 times to get the cydia icon to pop up.

  • Guest

    Where is the problem??

  • Guest

    Where is the problem?

  • Guest

    ??

  • matt

    is there a video for this?

  • mike

    INEEDHELP PLEASE

  • matt

    idk what to do

  • bobiq

    dpkg: serious warning: files list file for package `io.pangu.loader’ missing, assuming package has no files currently installed.

    (Reading database … 2393 files and directories currently installed.)

    Preparing to replace cydia 1.1.13 (using cydia_1.1.13_iphoneos-arm.deb) …

    Unpacking replacement cydia …

    Setting up cydia (1.1.13) …

    help ? this happens when I enter the command : dpkg -i cydia-lproj_1.1.12_iphoneos-arm.deb

    • Gaurav Girdhar

      having same problem some one plz help

  • DP

    why is that?

    /private/var/root/Media/Cydia/AutoInstall$ dpkg -i cydia-lproj_1.1.12_iphoneos-arm.deb

    dpkg: serious warning: files list file for package `io.pangu.loader’ missing, assuming package has no files currently installed.

    (Reading database … 2691 files and directories currently installed.)

    Preparing to replace cydia-lproj 1.1.12 (using cydia-lproj_1.1.12_iphoneos-arm.deb) …

    Unpacking replacement cydia-lproj …

    dpkg: dependency problems prevent configuration of cydia-lproj:

    cydia-lproj depends on cydia; however:

    Package cydia is not configured yet.

    dpkg: error processing cydia-lproj (–install):

    dependency problems – leaving unconfigured

    Errors were encountered while processing:

    cydia-lproj

    • Guest

      can you write down full text?

  • mike

    some help how do i do the cydia and auto install folders?

  • kings121

    ok guyz N gurlz here is how id did it with WinSCP…..first of all open winscp host name your ip adress user name “root” password “alpine” you should see a file browser after connected drag n drop these 2 files to the right of the filebrowser…….dpkg -i cydia-lproj_1.1.12_iphoneos-arm.deb dpkg -i cydia_1.1.13_iphoneos-arm.deb…….at the top of the winscp file browser is a terminal click on it and then click ok at the top where it say enter command enter these in the exact form dpkg -i cydia-lproj_1.1.12_iphoneos-arm.deb dpkg -i cydia_1.1.13_iphoneos-arm.deb you can copy n paste them from here then click enter when it reach the point where the command say installing cydia ans it seems to be stuck reboot the device cydia should now be on the phone

    • mike

      yeah but do you have to make the auto install file?

  • mike

    HELLLLLLLLLLLLLLLPPPPPPPPPPPPP

  • Mahmoud Hakim

    every time i open it it keeps saying preparing file system then restarts then nothing
    what to do ??????????

    • Mahmoud Hakim

      anyone please help

  • matt

    WHERES MY IP ADDRESS

    • CBCIVICATX

      Go to Setting > Wi-Fi > and next to your network name you’ll see and blue i circled. click on it and you will see your IP generally starting by 192.168.x.xx

  • dy72

    just follow directions , it works perfect for me , adding repos now . still have to wait for them to update but damn least ya know its comming and cydia installs pangu peep are the shit … big shout out to the pangu team

    • mike

      DUDE HOW DO I ADD THE AUTOINSTALL FOLDER

  • mike

    IOS GODS PLEASE HELP ME

  • matt

    what is the host name???

    • CBCIVICATX

      Your IP

      • matt

        it keep saying this

        The server rejected SFTP connection, but it listens for FTP connections.

        Did you want to use FTP protocol instead of SFTP? Prefer using encryption.

  • CBCIVICATX

    Just JB my iPad MINI WORKS LIKE A CHARM!!! and I updated by OTA. no problem!

    • matt

      what is the host name on winscp

  • matt

    dude somebody help ME

  • mike

    SOMEONE HELP ME WITH FOLDERS

  • matt

    im stuck on step 4…

  • Rob Piazza Jr.

    I can’t ssh it doesn’t work. Keeps saying it can’t connect or whatever. I am on the same wifi network; used the username and password. Its not working

    • matt

      same problem

      • Rob Piazza Jr.

        Sigh, so its not just me; then again SSH never seemed to work.

  • matt

    what is the hosts name?plz

  • mike

    can i please have somehelp

  • mike

    AOMEONE PLEASE

    • Lucus Bendzsa

      Well what is the problem.

      • mike

        im all logged in and what not how do i makethe folders and then on

        • Lucus Bendzsa

          I am not quite to that step give me a few

  • matt

    PLease HELP ANYONE

  • mike

    can somebody tell me how to make the folders

  • DP

    still not works, whats wrong now?

    /private/var/root/Media/Cydia/AutoInstall$ dpkg -i *.deb

    dpkg: serious warning: files list file for package `io.pangu.loader’ missing, assuming package has no files currently installed.

    (Reading database … 2691 files and directories currently installed.)

    Preparing to replace cydia-lproj 1.1.12 (using cydia-lproj_1.1.12_iphoneos-arm.deb) …

    Unpacking replacement cydia-lproj …

    Preparing to replace cydia 1.1.13 (using cydia_1.1.13_iphoneos-arm.deb) …

    Unpacking replacement cydia …

    Setting up cydia-lproj (1.1.12) …

    Setting up cydia (1.1.13) …

    • CBCIVICATX

      When you see Setting up cydia just reboot and it should be good for you

      • mike

        can you tell me how to make folders

      • DP

        Thanks, it works

  • matt

    ï keep getting this every time i try to login into winSCP

    The server rejected SFTP connection, but it listens for FTP connections.

    Did you want to use FTP protocol instead of SFTP? Prefer using encryption.

    • mke

      sftp

      • matt

        what?

        • mike

          use the SFTP

          • matt

            i did and thats what i get everytime

            network error: Connection to “192.168.x.x refused

            The server rejected SFTP connection, but it listens for FTP connections.

            Did you want to use FTP protocol instead of SFTP? Prefer using encryption.

          • Jay Jay

            Go to the Pangu app and install the SSH then try again

  • mike

    I NEED HELP,, WITH FOLDERS

  • parin

    Doesn’t log in. Says SFTP is being refused, but it hears FTP.
    I tried all three. Please Help!

    • Jaybell4444

      Mine says the same thing and tried all 3. Looking for help pleeeeease!

      • joeafff

        me too help!

    • Shawn

      I think you forgot the install open SSH step, then try to connect again

  • CBCIVICATX

    Did y’all install OpenSSH from Pangu first? It might be y’all problem connection….

    • mike

      dude i need help with the auto install folders

      • CBCIVICATX

        Why you need auto folder? I didn’t use that at all and everything worked fine.

        • mike

          you have cydia? well when i drop them in and it says installing cydia then what

          • CBCIVICATX

            I do have cydia and without using the auto folder. Just passing by the terminal and the command.

          • mike

            what do you mean passing by, whered you drop the folders

          • CBCIVICATX

            well me I didn’t use WINSCP or Duck I used FileZilla to transfer both .deb file on the root folder. after that I used WINSCP for the terminal and I got 2 errors when I wanted to install it. So i just mixed both command line and it worked.

  • Tbone23nc

    It shows 2 files to install which one do I use

  • Rob Piazza Jr.

    for those not able to connect using SSH, make sure your DNS is set to automatic and not google on both devices. Dunno why but it fixed it

    • matt

      how do i do that

      • Rob Piazza Jr.

        Check your router settings (under dns settings) and on your iphone under wifi information make sure the DNS is not google but is your isp’s DNS sever address.

    • mike

      how do i make the autoinstall folders

  • Tbone23nc

    Deb or iproj

  • Tbone23nc

    What’s the difference between Curia den and iproj do I install both

    • mlee19841

      install both

  • Tbone23nc

    Cydia deb*

    Typo

  • mike

    SOMEONE HELP MEEE :/

  • mlee19841

    trying to install a tweak to test the waters and i get and error. it says mobile substrate not installed??

  • Rui Pedro

    what file should i download now?

  • Daniel Gutierrez

    i need help this is the error I keep getting

  • Cesar Castro

    It doesn’t work when i put the ip, username and password

  • dksds

    Could someone help me i’m tried installing ifile but the icon didn’t appear :(. I tried a reboot and it’s still on the boot logo :(.

  • Parin

    I got it!!!!!!!!!! Thanks

  • matt

    now it says “”command ‘dpkg -cydia_1.1.13_iphones-arm.deb”
    failed with return code1 and error message dpkg: error processing cydia_1.1.13_iphones-arm.deb(–install): cannot access archive: no such file or directory errors were encountered while processing cydia 1.1.13_iphones-arm.deb

  • matt

    now it says in command
    “”command ‘dpkg -cydia_1.1.13_iphones-arm.deb”
    failed with return code1 and error message dpkg: error processing cydia_1.1.13_iphones-arm.deb(–install): cannot access archive: no such file or directory errors were encountered while processing cydia 1.1.13_iphones-arm.deb

    • matt

      same with other file

      • matt

        ANYONE?

  • Daniel Gutierrez

    any can help me with this error?

  • CBCIVICATX

    Y’ALL READ THIS PLEASE!!!

    I’m going to try my best to explain y’all how to make it. I will assume that you already know how to connect you on your device.

    Once you’re connected you should be in the root folder:

    /private/var/root

    Now just simply Drag & Drop those 2 files named:

    dpkg -i cydia-lproj_1.1.12_iphoneos-arm.deb
    dpkg -i cydia_1.1.13_iphoneos-arm.deb

    Now on WINSCP on top on the toolbar you’ll see a black screen. Click on it it’ll open you a terminal: On top of this terminal in the bar type that command:

    dpkg -i cydia-lproj_1.1.12_iphoneos-arm.deb dpkg -i cydia-lproj_1.1.12_iphoneos-arm.deb

    (Just copy my command like that you’ll be sure you won’t have any error of dependency files)

    Once you see That too last line:

    Setting up cydia-lproj (1.1.12) …
    Setting up cydia (1.1.13) …

    Just wait like 2 or 5 minute it’ll stay stuck normally but just to be sure wait couple minutes. Once you did that. just reboot your device and you should see Cydia!!!

    For any question just reply below my comment. I’ll try to answer it

    • matt

      do i click execute after typing that into command?

      • CBCIVICATX

        No just push the Enter key of your keyboard.

        • matt

          i did and it ends up clicking execute then i get an error message

          • CBCIVICATX

            oh my Bad I forgot to say for each file click right on it and set up permission or priority whatever. put 777 or 0777 and do that command line. It should be fine now 🙂

          • matt

            right click and click properties ?

          • CBCIVICATX

            yes

          • matt

            under permissions it says ”octal”’is that where i change it?

          • CBCIVICATX

            What program are you running? WINSCP?

          • matt

            yes

          • CBCIVICATX

            Ok. Yes where you see Octal: put 0777

          • matt

            for both?

          • CBCIVICATX

            Yes

          • matt

            I did that and when i copied and pasted the link you provided into command i still get an error message

          • CBCIVICATX

            Try a Hard reboot (Home + Power). If you still get an error. try to restore your device.

          • CBCIVICATX

            Be sure to follow my tutorial on top and it should be fine. don’t try to place your files somewhere else or play with folder. Just do as I said and you should be fine.

          • matt

            still getting error message…. 🙁

          • matt

            even after i hard reset

          • CBCIVICATX

            Erase everything you did previously and try again. If you still get an error. Try to restore your device on DFU mode. and follow exactly my procedure and you should’ve be fine.

          • matt

            i dont want lose all my stuff on my phone though :((

          • CBCIVICATX

            Back it up on iTunes or iCloud. When you’ll restore it. Set it up as a new iPhone to don’t put the same corrupted file as you had before. Once you did everything perfectly. Just Restore your backup or iCloud.

    • Brandon Ermita

      Can you please help me with the picture messaging problem?

      • CBCIVICATX

        Not really. I don’t have that problem for my part. Probably just wait an update of some dependency from Cydia or try a hard reboot. Home + Power.

        • Brandon Ermita

          What exactly do you mean by update dependency?

          • Brandon Ermita

            hard reboot didn’t work 🙁

          • Tgod1991

            I have same problem with iMessage and text message pictures

          • Brandon Ermita

            I hope someone finds a solution soon

          • Tgod1991

            I restored phone and re did everything problem mwas fixed for 20min now its back, something to do with installing cydia, guess no more picture messaging til they fix

    • CBCIVICATX

      UPDATE!!!:

      Directly after Dropped your two files. I forgot to say that. Right click on each file and change the Permission or Priority of it by 777 or 0777. And then run the terminal!

      • matt

        is that under properties when you right clikc on it?

    • mo

      i did this but dont see cydia id u change the permissions also

  • Brandon Ermita

    Is there any way to fix the picture messaging problem? other than that this seemed to have worked great for me 🙂

  • anonymously

    help i keep getting this?

    • Alphawolf49

      Did you uncheck the pp check box at bottom left? Also do not change your date and time on the phone it is not needed with this pangu jailbreak

      • anonymously

        i figured it out i failed to do a fresh restore running 8.1

        • Alphawolf49

          Oh i see that could do it (y)

          • anonymously

            do you know how to get rid of pp25? I unchecked the option for it

  • matt

    is there a video for this anywhere

    • CBCIVICATX

      I was gonna do one. But I don’t have time. I will probably tomorrow or in couple hours. I gotta go! Good luck everyone! Follow my tutorial below!

      • matt

        can you do a video for windows pls im still stuck

  • mike

    hello

  • CBCIVICATX

    /! TUTORIAL /!

    Y’ALL READ THIS PLEASE!!!

    I’m going to try my best to explain y’all how to make it. I will assume that you already know how to connect you on your device.

    Once you’re connected you should be in the root folder:

    /private/var/root

    Now just simply Drag & Drop those 2 files named:

    dpkg -i cydia-lproj_1.1.12_iphoneos-arm.deb
    dpkg -i cydia_1.1.13_iphoneos-arm.deb

    Now Right click on each file and change the Permissions or Priority of it by 777 or 0777 in the Octal field.

    Now on WINSCP on top on the toolbar you’ll see a black screen. Click on it it’ll open you a terminal. On top of this terminal in the bar type that command:

    dpkg -i cydia-lproj_1.1.12_iphoneos-arm.deb dpkg -i cydia-lproj_1.1.12_iphoneos-arm.deb

    (Just copy my command like that you’ll be sure you won’t have any error of dependency files)
    and press your “Enter” or Return Key of your keyboard or just click on Execute.

    Once you see those two last lines at the end:

    Setting up cydia-lproj (1.1.12) …
    Setting up cydia (1.1.13) …

    Just wait like 2 or 5 minutes it’ll stay stuck normally but just to be sure wait couple minutes. Once you did that. just reboot your device and you should see Cydia!!!

    Good luck!

    • mike

      i dont see where to change it to 777

    • mike

      i have to enter the commands one by one but in order right

      • Alan

        Didn’t you read what he wrote?

    • Erick121

      “dpkg -i cydia-lproj_1.1.12_iphoneos-arm.deb cydia_1.1.13_iphoneos-arm.deb” typing that without quotes worked for me

  • mike

    can somebody help me

  • Matthew

    Anyone know any tweaks working on iOS 8? Thanks!

    • mike

      dude can you help me

  • RNG

    /private/var/root/Media/Cydia/AutoInstall$ dpkg -i cydia-lproj_1.1.12_iphoneos-arm.deb

    dpkg: serious warning: files list file for package `io.pangu.loader’ missing, assuming package has no files currently installed.
    (Reading database … 2699 files and directories currently installed.)
    Preparing to replace cydia-lproj 1.1.12 (using cydia-lproj_1.1.12_iphoneos-arm.deb) …
    Unpacking replacement cydia-lproj …
    Setting up cydia-lproj (1.1.12) …

    Help?

    • mike

      do you have cydia installed?

      • RNG

        No I dont

    • Osama Muhammed

      use this command instead

      dpkg -i cydia-lproj_1.1.12_iphoneos-arm.deb cydia_1.1.13_iphoneos-arm.deb

      it should install them both at once without problem

      • mike

        it says setting up both of them i used that command now what?

        • Alphawolf49

          The reboot command is type reboot and hit enter

          • Alphawolf49

            I had same issue when installing the debs but when you get to the point where it says setting up….. That means it’s done and you can type in another command.

          • mike

            i still cant get cydia

      • RNG

        It seems to just stop here

        /private/var/root/Media/Cydia/AutoInstall$ dpkg -i cydia-lproj_1.1.12_iphoneos-arm.deb cydia_1.1.13_iphoneos-arm.deb

        dpkg: serious warning: files list file for package `io.pangu.loader’ missing, assuming package has no files currently installed.
        (Reading database … 2699 files and directories currently installed.)
        Preparing to replace cydia-lproj 1.1.12 (using cydia-lproj_1.1.12_iphoneos-arm.deb) …
        Unpacking replacement cydia-lproj …
        Preparing to replace cydia 1.1.13 (using cydia_1.1.13_iphoneos-arm.deb) …
        Unpacking replacement cydia …
        Setting up cydia-lproj (1.1.12) …
        Setting up cydia (1.1.13) …

        • Osama Muhammed

          yea i think that means its done, use reboot command

          • mike

            and whats the reboot command

          • mike

            dude whats the reboot command

          • lucas

            reboot command?

      • Jaybell4444

        It worked…Thank you!!!!!!!!!!!

  • Chad Skeen

    i cant find this application SSH anywhere on my ipod 5. only open ssh ??? i cant even open it

    • Tatsh

      It runs in the background. If you cannot get in, try reinstalling it. Also make sure you don’t have old information in ~/.ssh/known_hosts or equivalent.

      $ ssh mobile@192.168.1.104
      mobile@192.168.1.104‘s password:
      Tatshpad:~ mobile$ uname -a
      Darwin Tatshpad 14.0.0 Darwin Kernel Version 14.0.0: Tue Oct 7 00:04:44 PDT 2014; root:xnu-2783.3.13~4/RELEASE_ARM64_S5L8960X iPad4,2 arm64 J72AP Darwin

  • jordanissosmart

    tired to install ifile now in boot loop please help!!!!!

    • Bubba

      This happened to me too but i dont think its iFile. Letting cydia complete the filesystem will get you into the bootloop whenever you get the chance to restart your device.

  • Chad Skeen

    so confusing i dont even know how my ipod is connected to the computer . would you make a tut video or something pls

  • Chad Skeen

    TheWhiteHammer22 im sorry

  • tim trozzo

    I’ll wait until Pangu updates the jailbreak with cydia,besides chances are a lot of the tweaks and apps probably need to be updated as well.

  • steve

    Does anyone have a fix for the pictures not showing up in imessage after installing cydia? it sends but it doesnt show a picture, just a little blue circle like its a blank message. the person i sent the picture to said they never received it

    • Alphawolf49

      A lot of people are reporting the same issue in sure they will come out with a fix for it soon.

    • Drew Reed

      same problem. you can go to your camera roll and select from there and it will work. I’m not even sure this bug is related to pangu

    • Cesar Castro

      Same here

    • Cesar Castro

      I’m just gonna restore back to the way it was without jailbreak

  • Bubba

    I dont know if installing Cydia is such a good idea…After “preparing filesystem” completes your phone wont boot up after you restart! happened to me twice already! -iPhone 6 iOS 8.1 I would wait

  • Chad Skeen

    got it working im dum haha

    • brito

      how did you?

      • Chad Skeen

        i did what NJ said

  • dk

    WHAT THE HELL IS THE CP COMMAND???

    • Alphawolf49

      ?? Where are you seeing that?

  • Jay Jay

    Lol my iphone 5s is stuck on the apple logo doesn’t seem like the boot loop because it’s not even rebooting it just froze.

    • NotALegitPlayer

      Hold down power button and home button until it turns off

      • Jay Jay

        I did several times it won’t go pass the apple logo. Pangu app still recognizes it though.

  • Luke

    How do I SSH into my iphone 5 if it doesn’t have openSSH from cydia?

    • Jay Jay

      You can find SSH in Pangu app

      • Luke

        thank you so much

    • mike

      you have to jailbreak with pangu with the jailbreak tool ios 8, and you gotta install cydia with these directions cause it dont install cydia

  • Ian

    how long should i wait if the text just says “setting up cydia-lproj (1.1.12) …”?

  • Kyle

    You do not need to do any coding whatsoever. Create a folder in /private/var/root/media called “AutoInstall”, you do not even need to create a folder called Cydia, (despite what everyone else is claiming). Reboot and enjoy your semi-working Cydia.

  • Jasonviphone6+

    Muahahahahaha! I wouldn’t worry guys nothing works at all!! 😉

  • Jasonviphone6+

    Muahahahahaha!

    • Drew Reed

      haha, you installed PP

      • Jasonviphone6+

        Yeah which I can delete! If I want muahahahaha! Don’t be sore because you don’t have Cydia on your homescreen! 😉 xx

        • clay

          how do you delete pp i dot wat that shiz

  • wait , so what about Mobile Substrate?

    • Jasonviphone6+

      Doesn’t work zero tweaks work even with cydia substrate installed!

      • i see that i see that.. tried a few and of course they don’t show in settings.. Zepplin and such.. nothing too fancy..

        does cydia substrate supercede mobile substrate?

        • Jasonviphone6+

          Yes but it’s the tweak it self and cydia substrate that would need updating before we some working tweak action!! Give it another 24 hours! 😉

        • Jasonviphone6+

          Not even the most basic tweaks work! As I say I’m sure it’s only matter of hours the main thing is we’ve got cydia and it’s just a matter of a few hours until we can! 🙂

          • NOT TRUE!!!!

          • INSTALL the tweak Movie Box , via CYDIA on IOS 8.1

            No date change, just install the tweak;
            after installation, you’ll need to goto Settings > Reset > Reset Settings

            Just Reset the Settings – The Tweak then shows up..

            I could make a Video, but would need to use android phone since i can’t use Record Screen Tweak **

            Waiting on Activator to be updated, which would help BaZillions

          • I am on Movie Box..
            &
            I have AutoTouch (installed) but no Activator to use it lol
            Well Activator is installed and on Home Screen just comes up Black screen when accessed..

            but Movie Box, works..
            Small Win

            DingleBerry style

  • Cydia is there, but no tweaks are up to date with 8.1….
    or are there

    Someone start installing random tweaks and guinea pig this out for us!

    • Alphawolf49

      I was able to add sources in cydia and then I successfuly installed movie box v3 to my iPhone and rebooted and can use movie box

  • Jasonviphone6+

    At least I’ve got it installed just have to wait for package updates and ready to rock n roll!! Easiest way ie the way I got it to install is ssh via win scp and go down the var/mobile/Media/AutoInstall route drop the two files reboot done! As you can see it definitely worked for me! 😉

  • Luke

    I try to use command + T to open an SSH command line session but instead it opens “Transfers”. I am trying to use Transfers to send the commands but it replies with ‘error’ and such. What do I do from here? (I am using a mac)

    • matt

      did you use cyberduck?

  • Mike

    How do you reboot your phone through itunes because my power button doesnt work.
    Thanks.

  • Tweak: AutoTouch installs … runs..

    But without activator I cannot have it activate the Auto Touching, derp

  • Rui Alves

    I was trying to figured out why after install the icon for cydia doesn’t appeared and after uninstalled openssh from pangu app and rebooted the device the icon finally showed up

    • Tiago Oliveira

      rui boa noite
      estou a tentar tambem mas nao á meio de o icon aparecer, podes ajudar?

  • matt

    tutorial for windows PLSSS

  • This COMING From Dingle Berries first!!!!

    Tweak, MOVIE BOX is working on 8.1!!!

    • Alphawolf49

      lol I told you an hour ago down in this thread I installed movie box and it worked. So how could you have indeed been the one to first say it

  • INSTALL the tweak Movie Box , via CYDIA on IOS 8.1

    No date change, just install the tweak;
    after installation, you’ll need to goto Settings > Reset > Reset Settings

    Just Reset the Settings – The Tweak then shows up..

    I could make a Video, but would need to use android phone since i can’t use Record Screen Tweak **

    Waiting on Activator to be updated, which would help BaZillions

    • Alphawolf49

      You don’t have to reset your settings for movie box to show. After installing movie box just power your phone down and power it back on lol didn’t you read my post over an hour ago about movie box? Your the kind of person that likes to take credit for things eh?

      • nah i didn’t see your post until after the fact, and then felt kind down cause i wasn’t first … lol

        • Alphawolf49

          lol it’s all good

      • On a side note; with the date change no longer working for installs in 8.1, its good to see Movie Box isn’t dead for us.

        But yeah.. I’ll check tomorrow, on the mobile substrate part..
        I’d like to see Activator come around, and a few of my other fave tweaks back in action.. “Action Menu” Zepplin ” and a few others that i miss dearly.. key shortcuts, was new to me and i loved it.

        • Alphawolf49

          Yeah me too. Personally I like barrel and gridlock and winterboard to have a custom theme. I was successful installing winterboard but I downloaded a theme and respringed but it didn’t change anything lol. So it would be awesome to get mobile substrate updated for sure!

          • Hey Alpha, any luck with “Ringers and Tones” or an alternative to customizing all app notifications sounds?? for ios 8.1+

  • Lingon

    I can’t even connect to my device with cyber Duck!

  • Clizzardbash

    could someone make a video tutorial on windows for the manual setup and post a link afterwards? please

  • SpecialOpZ

    For all of you who have never used openSSH because we haven’t needed to in a while. You must reset your password from the default root and alpine combo. Anyone can log into your phone if you don’t change it. Here is the link for the procedure.

    http://cydia.saurik.com/password.html

  • Knight

    I tried all the steps mentioned here to no avail. I then went to restore my iPhone 6 Plus as a “new iPhone” and after that was able to get it to work.

  • mike

    Preparing Filesystem you guys are the best

  • johnny

    the iphone withought jailbreak have /var/root/Media ?

  • SpecialOpZ

    cydia installed apps are not showing up. Anyone else?

    • Alphawolf49

      The devs have to update their apps and tweaks to support iOS 8 so not many things will work from cydia right now as it shows that right in front page or cydia. But like Movie Box worked for me but after the install you have to reboot your phone. I just powered down and powered back on personally and the app was on my home screen.

      • Alphawolf49

        Also a side note you can add sources to cydia fine as well.

        • Retribution

          My cydia sources stayed when I jailbroke my iPad and iPhone 4s and didn’t have to re type them all in again

      • Retribution

        It says don’t expect any apps to work as you are on ios8 on cydia main menu when installed

    • Retribution

      I tried this on the iPhone 4s and didn’t work, and the iPad 4 already named the files, try reading my post made earlier this am to no there are 2 and long messages

  • joe lin

    help it dosent work for me when i typed my stuff for the winSCP i get error HELP

  • Vélcis Ribeiro

    Can’t use SSH says HOST is DOWN, please, any advice??

    • Alphawolf49

      Host is where you put your IP address you have to make sure that you installed Openssh from the pangu app first though. The enter root as username and alpine as password

      • Vélcis Ribeiro

        Yeah, i need to reinstall firmware than make the JB another time.

  • clay

    i put on the deb codes and it says setting up cydia should i hard reboot its been like that for awhile now

  • For those having problems installing Cydia using above method, follow these steps:

    1) Use FileZilla client to connect to your device with sftp://IPADDRESS, root, alpine

    2) Navigate to /var/root/Media

    3) Make a folder called Cydia. Inside this, create one more folder called AutoInstall

    4) Drop both .deb files into above folder – /private/var/root/Media/Cydia/AutoInstall

    5) Select both .deb files and right click File Permissions

    6) Change the value to 777

    7) Reboot your device

    8) BOOM! You will find Cydia!

    • worked for me thank you, had to reboot twice to see cydia on my homescreen

    • Lee

      Worked for me too. I had to reboot twice as well. Thanks!!

  • moses

    Ok follow these steps i got it step 1.) ssh into the iPhone copy both of the dev files to the default folder then make the Cydia folder inside the media folder and make the Autoinstall folder in the Cydia folder these folders are case sensitive step 2 run terminal form your computer type ssh root@youripadress hit enter then copy and paste dpkg -i cydia-lproj_1.1.12_iphoneos-arm.deb
    dpkg -i cydia_1.1.13_iphoneos-arm.deb hit enter once or twice if you like step 3.) reboot phone manually if cydia is not there ssh back into the phone navigate to the /applications folder and delete Cydia.app the go back to terminal type ssh root@youripadress the copy this again dpkg -i cydia-lproj_1.1.12_iphoneos-arm.deb
    dpkg -i cydia_1.1.13_iphoneos-arm.deb reboot the phone and boom i guarantee cydia will be there thank me later ima iOS god

    • moses

      dont change any permission don’t change anything

  • We’ve updated the post with an alternative method, and also included a video tutorial to go along with it. Hope it helps.

  • ajay singh

    mine is not coming…

  • ajay singh

    Still on this from last 10 mins

  • ajay singh

    see

  • ajay singh

    its keep on saying setting cydia-jproj

    nothing id happening

    • Menace

      i have the same problem

      • ajay singh

        plz somebody help me

        • Menace

          what you need help on

    • Ani

      IT was same for me… just wait for 2-5 mins and then reboot your phone, if cydia doesnt appears after 2 reboots then try this.

      If Cydia is not showing up on springboard after install & multi reboots: Use SSH to connect to device. Then use this command:

      ls /User/Library/Caches

      This will show all files in the Caches directory, look for a file with the extension .csstore (my 6+ was named com.apple.LaunchServices-102.csstore)

      Run the command:

      rm /User/Library/Caches/com.apple.LaunchServices-102.csstore

      Then immediately run:

      reboot

      Finished. Just make sure you have the right file name because I believe different devices use a different number for the plist name.

      This method re-runs launchservices on reboot.

      IT WORKED LIKE A CHARM FOR ME! 😉

  • ajay singh

    Setting up cydia-lproj (1.1.12) …
    stilll waiting to complete,,, ac anybody help plz.

  • Menace

    need help

  • Guest

    Help!!!

    • Matia Belvederi

      I had the same problem and I solved it simply giving the command “reboot” 3 or 4 times since cydia appears (sorry 4 my english)

    • you have 3 errors
      with install you are using one dash sign,, use 2 dash signs
      in first cydia after dash you are spelling “lproj” as “lprij”
      and after 2nd time you write cydia.. “lproj” text is missing and you are spelling “iphoneos” as “iphonos”

  • uldis

    Help!!

  • Menace

    Has anyone installed cydia yet ?? I’m having problem s with it help ??

  • Daniel

    Funny thing,the first time i did it all the default apps on my iphone were deleted!All i had were the apps i downloaded form the appstore

  • Ani

    For all of those who completed all of these steps and still dont see the CYDIA ICON try this it helped me right away.

    If Cydia is not showing up on springboard after install & multi reboots: Use SSH to connect to device. Then use this command:

    ls /User/Library/Caches

    This will show all files in the Caches directory, look for a file with the extension .csstore (my 6+ was named com.apple.LaunchServices-102.csstore)

    Run the command:

    rm /User/Library/Caches/com.apple.LaunchServices-102.csstore

    Then immediately run:

    reboot

    Finished. Just make sure you have the right file name because I believe different devices use a different number for the plist name.

    This method re-runs launchservices on reboot.

  • asad

    i face problem to this point .. where is terminal ??

    Now, open Terminal. Just search for it in Spotlight, if you’re not familiar with the program.

  • Sameh Mohd.Elwan

    Port: 21 or 22, use whichever one works
    i can’t connect to the server

  • random guy

    i have windows and windows doesnt have terminal need help

  • Franklin Carpenter

    None of theese commands are working!!!

  • Franklin Carpenter

    Help me! all of theese commands i type in, none of them work!

  • Erick121

    So Cydia substrate works..sort of

  • whisennand

    In the notes for the commant to make cydia install is says “dpkg –install cydia-lproj_1.1.12_iphoneos-arm.deb cydia_1.1.13_iphoneos-arm.deb” and I struggled with this getting an unknown command error. The video helped because you will notice he uses “dpkg – – install cydia-lproj_1.1.12_iphoneos-arm.deb cydia_1.1.13_iphoneos-arm.deb”

    its two dashes – not one 🙂 and it worked like a charm

  • Acemond

    If you don’t have a Wifi network to connect to, you can use iFunbox and open an SSH terminal via USB.

  • Matia Belvederi

    Hi all.. I followed all the steps but the Terminal doesn’t install my deb files and give me back this message:

    dpkg: unknown option -n

    Type dpkg –help for help about installing and deinstalling packages [*];

    Use `dselect’ or `aptitude’ for user-friendly package management;

    Type dpkg -Dhelp for a list of dpkg debug flag values;

    Type dpkg –force-help for a list of forcing options;

    Type dpkg-deb –help for help about manipulating *.deb files;

    Type dpkg –license for copyright license and lack of warranty (GNU GPL) [*].

    Options marked [*] produce a lot of output – pipe it through `less’ or `more’ !

    Someone know what is the problem?? thanks

  • Lucas Souza

    How i find “terminal” in windows?

  • mlee19841

    anyway to remove the blue pangu app since its not needed after the ssh install

  • Matia Belvederi

    when i give the command to install deb files I receives this message:

    dpkg: unknown option -n

    someone know what it means? thank

  • Alphawolf49

    Cydia Substrate was updated. I have confirmed Winterboard is working and have successfully themed my iPhone 5 running iOS 8.1 🙂 if anyone is curious the theme i used is Soft Remix for iOS 7 but i did also work for iOS 8.1 for me.

    • Twan

      How can i install Substrate, via the Cydia App?

      • Alphawolf49

        Yeah when you open cydia you should be able to see the update once the app refreshes

        • Twan

          I dont see any update…

          • Alphawolf49

            after a reboot can you try a respring. i believe you have to respiring the device every time after a reboot.

        • Twan

          Also when i click on things everywhere i get “Cannot Locate Package”

        • Twan

          Okay, got it, but after it installed the package and rebooted something, it doesnt show it. Do i need to restart it by myself again?

  • Jurb

    dude the thing you copied and pasted up there is missing a dash before install (–install) is what it should be.

  • Tgod1991

    You will be unable to send out picture messages after installing cydia, Mine is still not working after restore(clean restore) and hard boot, i reinstalled cydia and problem came back

    Picture messaging. You just can’t select from recents have to go to photo album

  • FRNO

    Hi
    I don’t know why but I’m stuck at installing open ssh
    when i try to download it via pangu it gives me this message which I don’t understand anything about.
    Can anyone help me?

  • Ronan Brown

    Files don’t drop into FileZilla???

  • FRNO

    i don’t know why but whenever i try to install open ssh via pangu i get this error

    http://www.imageupload.co.uk/images/2014/10/23/99c1slwkvy2m3jz2gm2n.jpg
    does anyone has any fix for this?

  • Karthik Pasupathy

    i forgot my root passsword which i changed in previous jailbreak ios 7..please help me sir i beg you

  • Start

    Is new Pangu Jailbreak is untethered?

    • Alphawolf49

      Yes it’s untethered.

  • decanus

    what is the terminal equivalant on windows 7? cant seem to use /cmd

    • Zuhair Aslam

      Download WinSCP.

  • Ray

    After done everything and cydia done also than i’m stuck on the apple logo iphone 5s…….Some one help please?

  • Gonçalo

    can someone please tell me what am I doing wrong?

    • Ray

      Type reboot than will done

  • Lars Behrens

    MAKE SURE YOU USE: -i OR –install !!!! -install is not a valid comment!!!

  • Alphawolf49

    Confirmed that Barrel is working as well. So so far:

    * cydia came out with a update to the cydia substrate which is formally Mobile Substrate.

    – Winterboard with Soft Remix for iOS 7 (works on ios 8.1)
    – Movie Box
    – CCContorls
    – Barrel
    – Eclipse

  • Mikeluv

    Everything worked fine for me but broke MMS in iMessage. Had to restore. I will try again when JB is updated.

  • FrostBite

    My command prompt on windows wont accept the ‘ssh’ command.
    What do I do?!?!

  • Stéphan Levavasseur

    Method #1 did not work but #2 was OK !!!

  • Kleinbird

    Might want to make it a little more clear that you can not have passcode/touchID enabled after you jailbreak. I rebooted my phone and now I’m in a boot loop. Now I have to restore, won’t be jailbreaking again until that’s fixed.

  • Juan Benjamin Bendeck

    i cant copy the deb files into the folder

  • Shahzaib

    dpkg –install cydia-lproj_1.1.12_iphoneos-arm.deb cydia_1.1.13_iphoneos-arm.deb

    the code written above is missing a – you would need to enter two ( – ) before install

  • Mrbunch

    had to tweak the last command to this

    dpkg –install cydia-lproj_1.1.12_iphoneos-arm.deb cydia_1.1.13_iphoneos-arm.deb

    • John

      so im using winscp for windows. Do i drag and drop the deb files first then run that command while im in the directory of the phone?

  • kkkkk

    Many Thanks

  • MC

    I jailbroke and installed Cydia on my 6 with IOS 8.1 everything was fine until about 2 hours later i realized my messages weren’t sending pictures properly, so i restarted my phone and it got stuck on the apple logo. I didn’t install anything from Cydia or Pangu aside from Open SSH. Tried everything and now I’m just restoring on Itunes… =(

    • MC

      Found out you can not have a passcode enabled in any way. It causes a Bootloop or Freeze on Apple Logo. Found someone else with the same issue on Reddit.

      • Kleinbird

        I second this. Found out the hard way as well. This issue should be more prominent in the steps; a warning that you WILL NOT BE ABLE TO USE PASSCODE LOCK AFTER JAILBREAK would have been nice…

        • CBCIVICATX

          Why Am I jailbroken on iPhone 6 Plus and i still use my Finger Print and passcode? everything’s working like a charm!

  • tharwat

    when i try to install it give me this messege
    ]
    Options marked [*] produce a lot of output – pipe it through `less’ or `more’ !

    tghets-iPhone:~/Media/Cydia/AutoInstall root# dpkg -install cydia-lproj_1.1.12_iphoneos-arm.deb cydia_1.1.13_iphoneos-arm.deb

    dpkg: unknown option -n

    Type dpkg –help for help about installing and deinstalling packages [*];

    Use `dselect’ or `aptitude’ for user-friendly package management;

    Type dpkg -Dhelp for a list of dpkg debug flag values;

    Type dpkg –force-help for a list of forcing options;

    Type dpkg-deb –help for help about manipulating *.deb files;

    Type dpkg –license for copyright license and lack of warranty (GNU GPL) [*].

    Options marked [*] produce a lot of output – pipe it through `less’ or `more’ !

    • Ciaran

      dpkg –install cydia-lproj_1.1.12_iphoneos-arm.deb cydia_1.1.13_iphoneos-arm.deb

      the code written in the steps above is missing a – you need to enter two ( – ) before install

  • Balveer

    hey i am stuck at command it just tell me dependency problem and when i tried to download dependency from your link it say 403 forbidden. help please !!!

  • pandacookie

    So I have jailbroken and installed Cydia, but even though I unchecked “PP”, PPSync installed anyway!!! Any way to get this off my phone? I know there was a way to get it uninstalled on 7, but I doubt it works for 8.1. Any ideas?

    • pandacookie

      Never mind. The Pangu app has a “remove” section. I removed PPSync there. Thanks anyway.

  • mat

    thanks working fine in my iphone 5

  • Menace

    so after installing cydia and installing some app like zeppling and winterboard the dont show up any solutions??!

  • RNG

    What do you do if your phone rejects the SFTP?

  • HELPPP

    Having problems connecting to SSH using filezilla, iFunBox, AND WINSCP. I installed open SSH through Pangu, and rebooted, and I tried reinstalling several times, but cannot connect to open SSH, as if I dont have OpenSSH enabled. Please help.

  • JodizzleTKR

    Hi i own a iPhone 4s and i jailbroke and installed cydia but after cydia respringed after setting up file system most of the stock app icons disappeared. Does anyone have an idea why?

  • Fadzly

    HELPPPPP

    dpkg: serious warning: files list file for package `io.pangu.loader’ missing, assuming package has no files currently installed.

    2476 files and directories currently installed.)

    Unpacking cydia-lproj (from cydia-lproj_1.1.12_iphoneos-arm.deb) …

    Selecting previously deselected package cydia.

    Unpacking cydia (from cydia_1.1.13_iphoneos-arm.deb) …

    Setting up cydia-lproj (1.1.12) …

    Setting up cydia (1.1.13) …

    • JodizzleTKR

      Thats normal just run the reboot command you should be good

  • ahmad

    yipppeeeeee I succeeded thank uuu very much who ever posted this article
    I was waiting for this time for a long time

  • 4lwaysReady

    Don’t jailbreak unless you really really want to. It’s probably worth waiting for the public release with all the bugs worked out. I jailbroke my iPhone4S 8.1 yesterday and now I get stuck on the apple logo on boot. Downloading 8.1 ipsw now.

    • Jacker

      Same here.

  • Jacker

    I success fully jailbroken my iPad and installed cydia + cydia substrate(after Installing cydia) but after rebooting it is stuck on apple logo.? Device: iPad 2 3g gsm and same for my iPhone 5s.

  • dwdwd

    Please Help, whenever i install an app thing from cydia, for example, iDynamic, it the app won’t appear, whenever i reboot my device, my device get’s stuck in the boot logo, so i restore and do the jailbreak again. My device is an iPhone 6. Also when i install cydia using winscp and install whatever deb. It appears. What’s going on!

  • Tgod1991

    Everyone must understand all the tweaks are mostly incompatible. Iphonehacks has a link on main page of some tweaks that you can use on iOS 8 jailbreak.

  • usman

    i cant do on my iphone 4s

    • Dgy Geezer

      me neither, Cydia is installed according to Pangu pkg list, but the icon does not show up. iPhone 4s Ios8.1

  • CBCIVICATX

    I don’t know about y’all but since I jailbroken my iPhone 6 plus. I lost my Credit Card on Apple Pay…. It’s kinda weird no…?!!!

  • CursiveFire

    used “dpkg –i cydia-lproj_1.1.12_iphoneos-arm.deb cydia_1.1.13_iphoneos-arm.deb” as -install comes up as a unknown command in terminal for me.

  • Brandon Ermita

    I’ve had to do this three times now..
    and I’ve only done it that many because I appreciate what these people are trying to do for us.. but everytime I do it.. the next day, if my phone dies or if I turn it off, it won’t turn on, it’ll just get stuck on the apple logo

  • Pete LP

    Hi Guys,
    i have a Question here , i have jailbreaked and I have Unlocked my SPRINT Iphone5 Using RSIM 7+ and Every thing works perfect even SMS 3G & 4G By changing some Carrier Settings via WINSCP(No Patch or tweak Involved) .

    Now i want to Know , if i install CYDIA will this Reset My Carrier Setting Changes ?

    I wont be using Any Tweaks So i don’t want CYDIA , But Still Since Pangu Dint provide CYDIA in the package … Is it Necessary to Install CYDIA ?

    Please Any One ..

  • aab

    I v installed cydia with above mentioned process. How do i unlock network now.?

  • jorgSaraiva

    its the third time im going to restore my phone, because of endless rebooting.
    Two times because of tweaks, one time i dont know i just woke up with my phone with no battery when i turned it on come endless loop again lol..

  • Stefan

    what do I do???

  • TacoGamer/JoleEh

    THX duuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuude im on Preparing Filesystem now <3

  • MegaAce042

    Type dpkg –help for help about installing and deinstalling packages [*];

    Use `dselect’ or `aptitude’ for user-friendly package management;

    Type dpkg -Dhelp for a list of dpkg debug flag values;

    Type dpkg –force-help for a list of forcing options;

    Type dpkg-deb –help for help about manipulating *.deb files;

    Type dpkg –license for copyright license and lack of warranty (GNU GPL) [*].

    Options marked [*] produce a lot of output – pipe it through `less’ or `more’ !

  • ajay singh

    how to download dependency files

  • Azhar

    dependency error while installing cydia on iphone 4s
    somebody please help me with dependency files

  • my desktop not wifi connet
    to install cydia plz help oter away….

  • toby ziegler

    i cant do anything when you get to the terminal steps. I have a windows 8 computer and I cant do any of the command steps. what should I do

  • Kane

    I did all the steps and Installed Cydia on my iPad 2 but now, some on my apps are missing; music, camera, FaceTime, Settings, etc. Did I do something wrong? Please help

  • Justin Garcia

    Did it with the second method via Windows 8.1 🙂

  • john

    On Pangu OpenSSL cannot be installed : dpkg failed to open package info file /var/lib/dpkg/status for reading: No such file or directory I get this error how to fix this

  • johnsmith

    After installing cydia, and preparing filesystem etc, i shut down my iphone and it never turns on again it stills on boot loop , and i have to restore it, any suggestions or same situations ?

  • michael

    thanks mate i did it and it worked for me

  • Andi Arbeit

    Anyone having problems with the second way of installation: It’s

    “dpkg –-install cydia-lproj_1.1.12_iphoneos-arm.deb cydia_1.1.13_iphoneos-arm.deb”

    (the doubleminus was missing)

  • Vasiq

    i get this while installing cydia
    please help me
    /private/var/root$ dpkg -i cydia-lproj_1.1.12_iphoneos-arm.deb’ ‘dpkg -i cydia_1.1.13_iphoneos-arm.deb

    dpkg: error processing cydia-lproj_1.1.12_iphoneos-arm.deb’ (–install):

    cannot access archive: No such file or directory

    dpkg: error processing ‘dpkg (–install):

    cannot access archive: No such file or directory

    dpkg: error processing -i (–install):

    cannot access archive: No such file or directory

    dpkg: serious warning: files list file for package `io.pangu.loader’ missing, assuming package has no files currently installed.

    (Reading database … 2692 files and directories currently installed.)

    Preparing to replace cydia 1.1.13 (using cydia_1.1.13_iphoneos-arm.deb) …

    Unpacking replacement cydia …

    Setting up cydia (1.1.13) …

    Errors were encountered while processing:

    cydia-lproj_1.1.12_iphoneos-arm.deb’

    ‘dpkg

    -i

  • Ebi

    Cydia App icon wasn’t appearing so i fixed it by Openning pangu app –> Manger then click on update pangu .01-0.2 and reboost once install is done and u will see Cydia

  • edwin

    is it ok that i didnt need to do the progress again as it said on the video my showed up right away

  • Htoo zaw

    error display when i install openssh from pangu . what should i do?

  • Bazza

    For those having problems with ‘dpkg’ error ‘Unable to open Archive, No such file or directory’. You have to make sure that you put the 2 .deb packages folder /private/var/root and then click ‘go’ ‘send command’ and dpkg from there

  • Coolguy

    When I try to do it, I get a message:

    dpkg: serious warning: files list file for package `io.pangu.loader’ missing, assuming package has no files currently installed.

    2540 files and directories currently installed.)

    Unpacking cydia (from cydia_1.1.13_iphoneos-arm.deb) …

    dpkg: dependency problems prevent configuration of cydia:

    cydia depends on cydia-lproj (>= 1.1.10); however:

    Package cydia-lproj is not configured yet.

    dpkg: error processing cydia (–install):

    dependency problems – leaving unconfigured

    Errors were encountered while processing:

    cydia-lproj_1.1.12_iphone-arm.deb

    cydia

    What should I do?

  • Jason Lee DeBias Sr.

    that was easy. went smooth on windows for me

  • Mike

    EASY METHOD Navigate to /var/root/Media. Make a folder called Cydia, in that make a folder called AutoInstall, drop the deb into there, and reboot device. On the device open the pangu app and go to manager>remove. Remove “PP2.0.” respring, cydia will appear where the shitty PP app was.

  • João De Sousa

    cant connect, I enter my IPadress (door 21 or 22), root, alpine and nothing…

  • luis

    installed but lost all my apps anyone have a fix?

  • malik

    can its work on ios 8.1 for iphone5?

  • Roberto Kawaski

    Solution: io.pangu.loader missing
    Run following commands simply by just copy and paste line by line:

    ls / User / Library / Caches
    rm /User/Library/Caches/com.apple.LaunchServices-102.csstore
    reboot

    If this method helps, please follow me on twitter @kakronachan

  • Tyler

    i did it just fine.

  • whiteghost

    retribution followed your example with windows 7 and Cydia now installed THANKS 🙂

  • Mark Patience Zunter

    I follow every single step correctly, but every time I go to change the directory, it says that there is no such file or directory

  • Darrell Starnik

    Could anyone help me please? I am also getting the terminal error: “dpkg: error processing cydia-lproj_1.1.12iphoneos-arm.deb (–install): cannot access archive: No such file or directory”.

  • fattonny

    If you have issues installing the packages individually (one does not install because is missing the other as a dependency), run the install in one line.

    dpkg -i cydia-lproj_1.1.12_iphoneos-arm.deb cydia_1.1.13_iphoneos-arm.deb

    That should install with no issues.
    Also since the default password is set to “alpine”, I would recommend changing it. Especially if you use your tablet in public places such as Caffes, libraries, School.

    To change password type: passwd:
    Specify root’s new password, and retype the same when prompted.

  • zain

    i m trying this it says no such file or directory

    • fattonny

      ssh root@YOUR_DEVICE_IP

      1. cd /var/root/Media (Unix based Os is case sensitive “M” =/= “m”)

      2. mkdir Cydia
      3. cd Cydia
      4. mkdir AutoInstall

      5. cd Autoinstall

      if you dont know how to move a file via ssh, use ftp for this step.

      6. Upload

      cydia-lproj_1.1.12_iphoneos-arm.deb
      cydia_1.1.13_iphoneos-arm.deb
      to

      /var/root/Media/Cydia/AutoInstall

      Run the install (Back to ssh)

      7. dpkg -i cydia-lproj_1.1.12_iphoneos-arm.deb cydia_1.1.13_iphoneos-arm.deb

  • zain

    command not found error plz help me

  • fattonny

    If you want to disable opensssh after jailbreaking your ipad, you can run

    launchctl unload -w /Library/LaunchDaemons/com.openssh.sshd.plist

  • Darrell Starnik

    For those getting the error “dpkg: error processing cydia-lproj_1.1.12iphoneos-arm.deb (–install): cannot access archive: No such file or directory”, here’s what I did:
    I deleted the two .deb files using Cyberduck, then uploaded them again. This time the 1.1.13 file installed, but the lproj1.1.12 file still did not. I then downloaded the lproj1.1.12 file from this page again and uploaded that to my iPhone (after deleting the old one). Voila, Cydia is on my iPhone.

  • ashley

    the IP address on my computer and my device do not match. is there some way I can fix this

  • Darrell Starnik

    Ashley, each device on your network will have a different IP address.

  • Darrell Starnik

    I was able to install Cydia, but it indicated an update for Pangu. When I installed that, it crashed my phone. I restored and will wait for an improved version of the JB.

  • memememe

    you a lifesaver retribution

  • Jcole

    I installed cydia and it was all fine. after playing in cydia for a while i turned it off now it is stuck on the boot screen. help!

  • MizzouSecret

    why is it asking me to pay $9.99 to set it up?

  • Walter Schreppers

    Pangu is awesome. just used the mac version of pangu a minute ago (ssh didn’t work) then noticed it directly installs cydia now! Afterwards I installed open ssh with cydia (as it no longer appears in the pangu app) since I want the command line mostly on all my phones ;). Now I can ssh to my iphone 5s again woohoo. Running latest ios 8.0.1 and jailbroken for the future nice work people!

  • sonn

    error occured during transfering resources, please try again, iphone 4s ios 8

    pls help

  • amin yusuf

    i want to unjailbreak my iphone.will it cause any error if i changed the default password “alpine” to another password.does it gonna effect the process of unjailbreak?

    • Gautam

      No, it doesn’t as when you want to unjailbreak your iPhone, you use iTunes, which wipes the jailbreak and the root password won’t cause any issue.

  • zayed

    zayedalkaabi